Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
IP Addressing Commands
address
Use the ip address Interface Configuration (Ethernet, VLAN, Port-channel)
mode command to define an IP address for an interface. Use the no form of
this command to remove an IP address definition.
Syntax
If the product is a switch router.
ip-address
ip address
ip-address
no ip address [
If the product is a switch only.
ip-address
ip address
ip-address
no ip address [
If the product is switch only and supports a single IP address:
ip-address
ip address
no ip address
Parameters
•
ip-address—Specifies the IP address.
•
mask—Specifies the network mask of the IP address.
•
prefix-length—Specifies the number of bits that comprise the IP address
prefix.The prefix length must be preceded by a forward slash (/). (Range:
8–30)
•
default-gateway ip-address—Specifies the default gateway IP address.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\IP_Addressing.fm
mask
prefix-length
{
|
]
mask
prefix-length
{
|
]
mask
prefix-length
{
|
}
} [default-gateway
} [default-gateway
IP Addressing Commands
38
ip-address
]
ip-address
]
599
Advertisement
Table of Contents
