Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Tunnel.fm
Command Mode
Global Configuration mode
User Guidelines
The DNS query interval (after the ISATAP router IP address is known) is the
Time-To-Live (TTL) that is received from the DNS, divided by (Robustness
+ 1).
The router solicitation interval (when there is an active ISATAP router) is the
minimum-router-lifetime that is received from the ISATAP router, divided by
(Robustness + 1).
Example
The following example sets the number of DNS query/router solicitation
refresh messages that the device sends to 5.
Console(config)#
5
tunnel isatap robustness
show ipv6 tunnel
Use the show ïpv6 tunnel EXEC mode command to display information on
the ISATAP tunnel.
Syntax
show ïpv6 tunnel
Command Mode
EXEC mode
Example
The following example displays information on the ISATAP tunnel.
Console>
show ipv6 tunnel
Tunnel 1
--------
Tunnel status
: DOWN
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
649
Tunnel Commands
Advertisement
Table of Contents
