Show System Id - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Parameters
• unit —Specifies the unit number. (Range: 1–8)
• tag—Specifies the device asset-tag.
Default Configuration
No asset tag is defined.
The default unit number is the master unit number.
Command Mode
Global Configuration mode
Example
The following example assigns the asset-tag 2365491870 to the device.
Console(config)#

show system id

The show system id EXEC mode command displays the system identity
information.
Syntax
show system id [
Parameters
unit unit—Specifies the unit number. (Range: 1–8)
Command Mode
EXEC mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
104
System Management Commands
CLI\files\System_Management.fm
asset-tag
unit unit]
2365491870