Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
The software does not send "start"/"stop" messages if the port is force-
authorized.
The software does not send "start"/"stop" messages for hosts that are sending
traffic on the guest VLAN or on the unauthenticated VLANs.
The following table describes the supported Radius accounting Attributes
Values and when they are sent by the switch.
N a m e
User-Name (1)
NAS-IP-Address (4)
NAS-Port (5)
Class (25)
Called-Station-ID (30)
Calling-Station-ID (31)
Acct-Session-ID (44)
Acct-Authentic (45)
Acct-Session-Time (46)
Acct-Terminate-Cause (49)
Nas-Port-Type (61)
Example
console(config)# aaa accounting dot1x start-stop group radius
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
234
AAA Commands
CLI\files\AAA.fm
Sta r t
St o p
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
De s c r i p t io n
Supplicant's identity.
The switch IP address that is used
for the session with the Radius
server.
The switch port from where the
supplicant has logged in.
Arbitrary value is included in all
accounting packets for a specific
session.
The switch MAC address.
The supplicant MAC address.
A unique accounting identifier.
Indicates how the supplicant was
authenticated.
Indicated how long the supplicant
was logged in.
Reports why the session was
terminated.
Indicates the supplicant physical port
type.
Advertisement
Table of Contents
