Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Parameters
vlan-id—Specifies the VLAN.
Default
Learning pim-dvmrp is enabled.
Command Mode
Global Configuration mode
User Guidelines
Multicast router ports are learned based on:
•
Queries received on the port
•
PIM/PIMv2 received on the port
•
DVMRP received on the port
•
MRDISC received on the port
MOSPF received on the port
You can execute the command before the VLAN is created.
Example
console(config)# ip igmp snooping vlan 1 mrouter learn pim-dvmrp
ip igmp snooping mrouter interface
Use the ip igmp snooping mrouter interface Global Configuration mode
command to define a port that is connected to a multicast router port. Use
the no form of this command to remove the configuration.
Syntax
ip igmp snooping
no ip igmp snooping
Parameters
•
vlan-id—Specifies the VLAN.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\IGMP_Snooping.fm
vlan vlan-id
mrouter interface i
vlan vlan-id
mrouter interface
nterface-list
interface-list
IGMP Snooping Commands
525
Advertisement
Table of Contents
