Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Syntax
switchport general forbidden vlan
no switchport general forbidden vlan
Parameters
•
add vlan-list—Specifies a list of VLAN IDs to add. Separate
nonconsecutive VLAN IDs with a comma and no spaces. Use a hyphen to
designate a range of IDs.
•
remove vlan-list—Specifies a list of VLAN IDs to remove. Separate
nonconsecutive VLAN IDs with a comma and no spaces. Use a hyphen
designate a range of IDs.
Default Configuration
All VLANs are allowed.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
Example
The following example forbids adding VLAN IDs 234 to 256 to
gigabitethernet port 1/0/7.
Console(config)#
Console(config-if)#
Console(config-if)#
256
map protocol protocols-group
Use the map protocol protocols-group VLAN Configuration mode command
to map a protocol to a group of protocols. Use the no form of this command
to delete a protocol from a group.
Syntax
map protocol
no map protocol
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
510
VLAN Commands
CLI\files\VLAN_ISCLI_Only.fm
interface
switchport mode general
switchport general forbidden vlan add
protocol
encapsulation
[
protocol
encapsulation
[
{add vlan-list | remove vlan-list}
{add vlan-list | remove vlan-list}
gigabitethernet 1/0/7
] protocols-group
]
234-
group
Advertisement
Table of Contents
