Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
no sntp server {
Parameters
•
ipv4-address—Specifies the server IPv4 address.
•
ipv6-address—Specifies the server IPv6 address. A Link Local address
(IPv6Z address) can be defined.
pv6z-address
•
format is:
are:
• ipv6-link-local-address—Specifies the IPv6 Link Local address.
• interface-name—Specifies the outgoing interface name. The interface
name has the format:
physical-port-name
| {
decimal-digit
{
digit: 0–9)
•
hostname—Specifies the server hostname. Only translation to IPv4
addresses is supported. (Length: 1–158 characters. Maximum label length:
63 characters)
•
poll—Enables polling.
•
key keyid—Specifies the Authentication key to use when sending packets
to this peer. (Range:1–4294967295)
Default Configuration
No servers are defined.
Command Mode
Global Configuration mode
User Guidelines
Up to 8 SNTP servers can be defined.
The sntp unicast client enable Global Configuration mode command
enables predefined unicast clients.
The sntp unicast client poll Global Configuration mode command globally
enables polling.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
120
Clock Commands
CLI\files\Clock.fm
ipv4-address
ipv6-address
|
—
Specifies the IPv6Z address to ping. The IPv6Z address
ipv6-link-local-address
vlan
}. The subparameter integer has the format:
integer
} | {
ipv6z-address
|
interface-name
}%{
integer
ch
integer
{
} |
{
decimal-digit
}{
}. (Range for the decimal-
hostname
|
}
}. The subparameters
isatap
integer
} |
{
}
Advertisement
Table of Contents
