FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\System_Management.fm
reload
The reload Privileged EXEC mode command reloads the operating system.
Syntax
stack-member-number]
reload [slot
Command Mode
Privileged EXEC mode
Parameters
stack-member-number —Specifies the new master unit number. (Range:
1–8). If unspecified, reloads all the units.
Example
The following example reloads the operating system on all units.
Console#
reload
This command will reset the whole system and disconnect your
current session. Do you want to continue? (y/n) [n]
stack master
The stack master Global Configuration mode command forces a stack master
selection. Use the no form of this command to restore the default
configuration.
Syntax
unit
stack master unit
no stack master
Parameters
unit —Specifies the new master unit number. (Range: 1–2)
Default Configuration
The default is no forced master.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
83
System Management Commands