Show Qos Map - Dell PowerConnect 5324 Command Line Interface Reference Manual

• default-cos—Specifies the default CoS value being assigned to the port. If the port is
trusted and the packet is untagged then the default CoS value becomes the CoS value.
(Range: 0 - 7)
Default Configuration
Port CoS is 0.
Command Mode
Interface Configuration (Ethernet, port-channel) command
User Guidelines
• You can use the default value to assign a CoS value to all untagged packets entering the
port.
Example
The following example configures port g5 default CoS value to 3.
Console (config)# interface ethernet g5
Console (config-if) qos cos 3

show qos map

The show qos map User EXEC mode command displays all the QoS maps.
Syntax
show qos map [dscp-queue]
• dscp-queue—Displays the DSCP to queue map.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
• There are no user guidelines for this command.
217
QoS Commands