Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Examples
The following example authenticates key 8.
Console(config)#
Device(config)# sntp authentication-key 8 md5 ClkKey
Device(config)# sntp trusted-key 8
Device(config)# sntp authenticate
sntp client poll timer
The sntp client poll timer Global Configuration mode command sets the
polling time for the Simple Network Time Protocol (SNTP) client. Use the no
form of this command to restore the default configuration.
Syntax
sntp client poll timer
no sntp client poll timer
Parameters
seconds—Specifies the polling interval in seconds. (Range: 60–86400)
Default Configuration
The default polling interval is 1024 seconds.
Command Mode
Global Configuration mode
Example
The following example sets the polling time for the SNTP client to 120
seconds.
Console(config)#
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
114
Clock Commands
CLI\files\Clock.fm
sntp trusted-key
seconds
sntp client poll timer
8
120
Advertisement
Table of Contents
