Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Clock.fm
User Guidelines
The sntp broadcast client enable Global Configuration mode command
globally enables broadcast clients.
The sntp anycast client enable Global Configuration mode command
globally enables anycast clients.
Example
The following example enables the SNTP broadcast and anycast client on
gigabitethernet port gi1/0/3
Console(config)#
gigabitethernet 1/0/3
sntp client enable
sntp client enable (Interface)
To enable the Simple Network Time Protocol (SNTP) broadcast and anycast
client on an interface, use the sntp client enable Interface Configuration
command. Use the no form of this command to disable the SNTP client.
The sntp client enable Interface Configuration (Ethernet, Port-channel,
VLAN) mode command enables the Simple Network Time Protocol (SNTP)
broadcast and anycast client on an interface. Use the no form of this
command to disable the SNTP client.
Syntax
sntp client enable
no sntp client enable
Default Configuration
The SNTP client is disabled on an interface.
Command Mode
Interface Configuration (Ethernet, Port-channel, VLAN) mode
User Guidelines
The sntp broadcast client enable Global Configuration mode command
globally enables broadcast clients.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
117
Clock Commands
Advertisement
Table of Contents
