Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Port
Reject reason
Time
Table 1:
Reject Reason Description
Abbreviation
ACL-DEL
ACL-NOTEXST
ACL-OVRFL
AUTH-ERR
FLTR-ERR
FRS-MTH-DENY
IPv6WithMAC
IPV6WithNotIP
POL-BasicMode
POL-DEL
POL-OVRFL
RAD-APIERR
RAD_INVLRES
RAD-NORESP
VLAN-DFLT
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
326
802.1x Commands
CLI\files\802.1X.fm
Ethernet port or port-channel
Reason in the case of failure. The following table
describes the reasons.
Supplicant Session time
Description
ACL was deleted by a user
ACL sent by radius Server does not exist on the device
ACL sent by radius server can not be applied because of
TCAM overflow
Rejected by Radius due wrong user name or password in
Radius server
Radius accept message contains more than 2 filter-id
First method is "deny"
Radius accept message contains filter with IPv6 DIP and
MAC addresses
Radius accept message contains IPv6 and not IP
simultaneously
Policy Map is not supported in the QoS basic mode
Policy Map was deleted by a user
Policy Map sent by radius server can not be applied
because of TCAM overflow
RADIUS API returned error (e.g. No RADIUS server is
configured).
RADIUS server returned invalid packet (e.g. EAP Attribute
is missing)
RADIUS server is not responding
VLAN sent by radius server can not be applied because it
is the Default VLAN
Advertisement
Table of Contents
