Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Switch(config-if) #
WORDValue of the first keyword to replace
<cr>
Switch(config-if) #
WORDValue of the second keyword to replace
macro apply
Use the macro apply interface configuration command to apply a macro to an
interface or to apply and trace a macro configuration on an interface.
Syntax
apply | trace} macro-name [parameter {value}] [parameter {value}]
macro {
[parameter {value}
Parameters
apply—Apply a macro to the specific interface.
•
trace—Apply and trace a macro to the specific interface.
•
•
macro-name—Specify the name of the macro.
•
parameter—(Optional) Specify unique parameter values that are specific
to the interface. You can enter up to three keyword-value pairs. Parameter
keyword matching is case sensitive. All matching occurrences of the
keyword are replaced with the corresponding value.
Default Configuration
The command has no default setting.
Command Mode
Interface Configuration mode
User Guidelines
You can use the macro trace macro-name Interface Configuration command
to apply and show the macros running on an interface or to debug the macro
to find any syntax or configuration errors.
If a command fails because of a syntax error or a configuration error the
macro continues to apply t) in the interface. Use the parameter value
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\750_Macro.fm
macro apply duplex $DUPLEX ?
macro apply duplex $DUPLEX full $SPEED ?
]
Macro Commands
65
Advertisement
Table of Contents
