FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
gi1/0/
3
Enabled
The following table describes the fields shown above.
F i e ld
Port
Status
Mode
Action
Maximum
Trap
Frequency
show ports security addresses
Use the show ports security addresses Privileged EXEC mode command to
display the current dynamic addresses in locked ports.
Syntax
show ports security addresses [
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
Privileged EXEC mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\Address_Table.fm
Addresses
Lock
Discard, 8
D e s c r ip t io n
The port number.
The port security status. The possible values are: Enabled or
Disabled.
The port security mode.
The action taken on violation.
The maximum number of addresses that can be associated on
this port in the Max-Addresses mode.
The status of SNMP traps. The possible values are: Enable or
Disable.
The minimum time interval between consecutive traps.
interface-id
Disabled -
Shutdown
Address Table Commands
411