Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DCHP_Server.fm
Syntax
name
ip dhcp pool host
name
no ip dhcp pool host
Parameters
name—Specifies the DHCP address pool name. It can be either a symbolic
string (such as Engineering) or an integer (such as 8). (Length: 1–32
characters)
Default Configuration
DHCP hosts are not configured.
Command Mode
Global Configuration mode
User Guidelines
During execution of this command, the configuration mode changes to the
DHCP Pool Configuration mode, which is identified by the (config-dhcp)#
prompt. In this mode, the administrator can configure host parameters, such
as the IP subnet number and default router list.
Example
The following example configures Station as the DHCP address pool:
Console(config)#
station
ip dhcp pool host
Console(config-dhcp)#
ip dhcp pool network
Use the ip dhcp pool network Global Configuration mode command to
configure a Dynamic Host Configuration Protocol (DHCP) address pool on a
DHCP Server and enter DHCP Pool Configuration mode. Use the no form of
this command to remove the address pool.
Syntax
name
ip dhcp pool network
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
658
DHCP Server Commands
Advertisement
Table of Contents
