FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
using auto-negotiation. Use the no form of this command to restore the
default configuration.
Syntax
{10 | 100 | 1000 | 10000}
speed
no speed
Parameters
•
10—Forces10 Mbps operation.
•
100—Forces 100 Mbps operation.
•
1000—Forces 1000 Mbps operation.
•
10000—Forces 10000 Mbps operation.
Default Configuration
The port operates at its maximum speed capability.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
The no speed command in a Port-channel context returns each port in the
Port-channel to its maximum capability.
Example
The following example configures the speed of gigabitethernet port 1/0/5 to
100 Mbps operation.
Console(config)#
Console(config-if)#
duplex
Use the duplex Interface Configuration (Ethernet, Port-channel) mode
command to configure the full/half duplex operation of a given Ethernet
interface when not using auto-negotiation. Use the no form of this command
to restore the default configuration.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\Ethernet.fm
gigabitethernet 1/0/5
interface
100
speed
Ethernet Configuration Commands
331