Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IP_Addressing.fm
Command Mode
Global Configuration mode
Example
The following example configures the ARP timeout to 12000 seconds.
Console(config)#
12000
arp timeout
arp timeout
Use the arp timeout inTerface Configuration command to configure how
long an entry remains in the ARP cache for specific interface. Use the no form
of this command restore the default value.
Syntax
seconds
arp timeout
no arp timeout
Parameters
seconds—Time (in seconds) that an entry remains in the ARP cache. It is
recommended not to set it to less than 3600. (Range: 1–40000000)
Default
Defined by the arp timeout Global Configuration command
Command Mode
Interface Configuration (Ethernet, VLAN, Port-channel) mode. It cannot be
configured for a range of interfaces (range context).
User Guidelines
This configuration can be applied only if at least one IP address defined on
specific interface.
Example
Console (config)#
vlan 1
interface
Console(config-if)#
12000
arp timeout
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
606
IP Addressing Commands
Advertisement
Table of Contents
