FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Configuration/Image File
Commands
copy
The copy Privileged EXEC mode command copies files from a source to a
destination.
Syntax
source-url destination-url [snmp]
copy
Parameters
•
source-url—Specifies the source file location URL or source file reserved
keyword to be copied. (Length: 1–160 characters)
•
destination-url—Specifies the destination file URL or destination file
reserved keyword. (Length: 1–160 characters)
•
snmp—Specifies that the destination/source file is in SNMP format. Used
only when copying from/to startup-config.
The following table displays URL options.
K e y w o r d
flash://
running-config
startup-config
image
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\Configuration_Image.fm
So u r c e o r D e s t in a t i o n
Source or destination URL for flash memory. This is the default URL If
a URL is specified without a prefix.
Currently running configuration file.
Startup configuration file.
Image file. If specified as the source file, it is the active image file. If
specified as the destination file, it is the non-active image file.
Configuration/Image File Commands
6
127