Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
The IGMP Snooping Querier disables itself if it detects IGMP traffic from a
multicast router. It restarts automatically after host-time-out/2.
Following are the IGMP snooping querier parameters as a function of the
IGMP snooping parameters:
•
QueryMaxResponseTime: host-time-out/10.
•
QueryInterval: host-time-out/ 3.
Example
console(config)# ip igmp snooping vlan 1 querier
ip igmp snooping querier address
Use the ip igmp snooping querier address Global Configuration mode
command to define the source IP address that the IGMP snooping querier
would use. Use the no form of this command to return to default.
Syntax
ip igmp snooping
no ip igmp snooping
Parameters
•
vlan-id—Specifies the VLAN.
•
ip-addres—Source IP address.
Default
If an IP address is configured for the VLAN, it is used as the source address of
the IGMP snooping querier.
Command Mode
Global Configuration mode
User Guidelines
If an IP address is not configured by this command, and no IP address is
configured for the querier's VLAN, the querier is disabled.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
530
IGMP Snooping Commands
CLI\files\IGMP_Snooping.fm
vlan vlan-id
querier address
vlan vlan-id
querier address
ip-address
Advertisement
Table of Contents
