Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port, or Port-channel.
Default Configuration
There is no default configuration for this command.
Command Mode
EXEC mode
User Guidelines
The policers option is relevant for a VLAN interface only.
If no parameter is specified with the show qos interface command, the port
QoS mode (DSCP trusted, CoS trusted, untrusted, and so on), default CoS
value, DSCP-to-DSCP- map (if any) attached to the port, and policy map (if
any) attached to the interface are displayed. If a specific interface is not
specified, the information for all interfaces is displayed.
Example
This is an example of the output from the show qos interface buffers
command for 8 queues.
Console> show qos interface buffers
gi1/0/1
Notify Q depth:
buffers gi2/0/1
Ethernet gi2/0/1
qid
thresh0
1
100
2
100
3
100
4
100
5
100
6
100
7
100
8
100
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
746
Quality of Service (QoS) Commands
CLI\files\QoS.fm
thresh1
thresh2
100
80
100
80
100
80
100
80
100
80
100
80
100
80
100
80
gi1/0/1
Advertisement
Table of Contents
