Dell PowerConnect PC5524 Reference Manual page 283

5500 series
Table of Contents

Advertisement

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Console# show rmon history 1 other
Sample Set: 1
Interface: gi1/0/1
Requested samples: 50
Maximum table size: 500
Time
-------------------
Jan 18 2005 21:57:00
Jan 18 2005 21:57:30
The following table describes significant fields shown in the display:
F i e ld
Time
Octets
Packets
Broadcast
Multicast
Utilization
CRC Align
Undersize
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\RMON.fm
Owner: Me
Interval: 1800
Granted samples: 50
Dropped
------
3
3
D e s c r i p t io n
Date and Time the entry is recorded.
The total number of octets of data (including those in bad
packets and excluding framing bits but including FCS octets)
received on the network.
The number of packets (including bad packets) received during
this sampling interval.
The number of good packets received during this sampling
interval that were directed to the broadcast address.
The number of good packets received during this sampling
interval that were directed to a multicast address. This number
does not include packets addressed to the broadcast address.
The best estimate of the mean physical layer network
utilization on this interface during this sampling interval, in
hundredths of a percent.
The number of packets received during this sampling interval
that had a length (excluding framing bits but including FCS
octets) between 64 and 1518 octets, inclusive, but had either a
bad Frame Check Sequence (FCS) with an integral number of
octets (FCS Error) or a bad FCS with a non-integral number of
octets (Alignment Error).
The number of packets received during this sampling interval
that were less than 64 octets long (excluding framing bits but
including FCS octets) and were otherwise well formed.
Collisions
----------
0
0
RMON Commands
283

Advertisement

Table of Contents
loading

Table of Contents