Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Syntax
snmp-server set
Parameters
•
variable-name—Specifies the SNMP MIB variable name, which must be a
valid string.
•
name value—Specifies a list of name and value pairs. Each name and
value must be a valid string. In the case of scalar MIBs, there is only a
single name-value pair. In the case of an entry in a table, there is at least
one name-value pair, followed by one or more fields.
Command Mode
Global Configuration mode
User Guidelines
Although the CLI can set any required configuration, there might be a
situation where an SNMP user sets a MIB variable that does not have an
equivalent command. To generate configuration files that support those
situations, use the snmp-server set command.
Example
The following example configures the scalar MIB sysName with the value
TechSupp.
Console(config)#
show snmp
Use the show snmp Privileged EXEC mode command to display the SNMP
status.
Syntax
show snmp
Command Mode
Privileged EXEC mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
176
SNMP Commands
CLI\files\SNMP.fm
variable-name name value
snmp-server set
name2 value2
[
sysName sysname TechSupp
...]
Advertisement
Table of Contents
