Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Command Mode
Global Configuration mode
Example
The following example assigns the static ARP binding list Servers to VLAN
37.
Console(config)#
ip arp inspection logging interval
Use the ip arp inspection logging interval Global Configuration mode
command to set the minimum time interval between successive ARP
SYSLOG messages. Use the no form of this command to restore the default
configuration.
Syntax
ip arp inspection logging interval {
no ip arp inspection logging interval
Parameters
•
seconds—Specifies the minimum time interval between successive ARP
SYSLOG messages. A 0 value means that a system message is immediately
generated. (Range: 0–86400)
•
infinite—Specifies that SYSLOG messages are not generated.
Default Configuration
The default minimum ARP SYSLOG message logging time interval is 5
seconds.
Command Mode
Global Configuration mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
582
DHCP Snooping and ARP Inspection Commands
CLI\files\DHCP_Snooping.fm
ip arp inspection list assign
seconds | infinite}
37 servers
Advertisement
Table of Contents
