Advertisement
User Guidelines
•
Use no qos trust to disable the trust mode on each port.
•
Use qos trust to enable trust mode on each port.
Example
The following example configures port g15 to default trust state (CoS).
console(config)# interface ethernet g15
console(config-if) qos trust
qos cos
The qos cos Interface Configuration mode command configures the default port CoS value. To
return to the default setting, use the no form of this command.
Syntax
qos cos default-cos
no qos cos
•
default-cos — Specifies the default CoS value being assigned to the port. If the port is
trusted and the packet is untagged, the CoS value will get the default CoS from the port.
(Range: 0 - 7)
Default Configuration
Port CoS is 0.
Command Mode
Interface Configuration (Ethernet, port-channel) command
User Guidelines
This command has no default configuration.
Example
The following example configures port g15 default CoS value to 3.
console(config)# interface ethernet g15
console(config-if) qos cos 3
show qos map
The show qos map User EXEC mode command displays all the QoS maps.
194
QoS Commands
Advertisement
