FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
F i e ld
Cipher
Auth Code
show crypto key pubkey-chain ssh
The show crypto key pubkey-chain ssh Privileged EXEC mode command
displays SSH public keys stored on the device.
Syntax
show crypto key pubkey-chain ssh
{bubble-babble | hex}
Parameters
•
username username—Specifies the remote SSH client username. (Length:
1–48 characters)
fingerprint {bubble-babble | hex}—Specifies the fingerprint display
•
format. The possible values are:
• bubble-babble—Specifies that the fingerprint is displayed in Bubble
Babble format.
• hex—Specifies that the fingerprint is displayed in hexadecimal format.
Default Configuration
The default fingerprint format is hexadecimal.
Command Mode
Privileged EXEC mode
Example
The following examples display SSH public keys stored on the device.
Console#
show crypto key pubkey-chain ssh
Username
--------
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\Telnet_SSH_and_Slogin.fm
D e s c r i p t io n
The encryption type (3DES, Blowfish, RC4)
The authentication Code (HMAC-MD5, HMAC-SHA1)
[username username] [fingerprint
]
Telnet, SSH and Slogin Commands
211