Mdix - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax

mdix

Use the mdix Interface Configuration (Ethernet) mode command to enable
cable crossover on a given interface. Use the no form of this command to
disable cable crossover.
Syntax
{on | auto}
mdix
no mdix
Parameters
• on—Enables manual MDIX.
auto—Enables automatic MDI/MDIX.
•
Default Configuration
The default setting is On.
Command Mode
Interface Configuration (Ethernet) mode
Example
The following example enables automatic crossover on port 1/5.
Console(config)#
Console(config-if)# mdix auto.
The following example enables automatic crossover on port
gigabitethernet 1/0/ 1.
Console(config)#
Console(config-if)#
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
336
Ethernet Configuration Commands
CLI\files\Ethernet.fm
interface gi1/0/1/5
gigabitethernet 1/0/5
interface
mdix auto