Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Command Mode
Interface Configuration mode(Ethernet)
User Guidelines
•
Use the storm-control broadcast level Interface Configuration command
to set the maximum rate.
•
Use the storm-control include-multicast Interface Configuration
command to also count multicast packets and optionally unknown unicast
packets in the storm control calculation.
•
Example
console(config)# interface gigabitethernet 1/0/1
console(config-if)# storm-control broadcast enable
storm-control broadcast level kbps
Use the storm-control broadcast levelInterface Configuration mode
command to configure the maximum rate of broadcast. Use the no form of
this command to return to default.
Syntax
storm-control broadcast level kbps
no storm-control broadcast level
Parameters
kbps—Maximum of kilo bits per second of broadcast traffic on a port.
(Range: GE: 3.5M–1G, 10GE: 8.5M–10G)
Default Configuration
1000
Command Mode
Interface Configuration mode (Ethernet)
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
348
Ethernet Configuration Commands
CLI\files\Ethernet.fm
kbps
Advertisement
Table of Contents
