Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
option
Use the option DHCP Pool Configuration mode command to configure the
Dynamic Host Configuration Protocol (DHCP) Server options. Use the no
form of this command to remove the options.
Syntax
code {ascii ascii-string | hex hex-string | ip ip-address}
option
code ip-address1
option ip-list
code
no option
Parameters
•
code—Specifies the DHCP option code.
•
ascii ascii-string—Specifies an NVT ASCII character string. ASCII
character strings, which contain white space, must be delimited by
quotation marks.
hex hex-string—Specifies dotted hexadecimal data: Each byte in
•
hexadecimal character strings is two hexadecimal digits. Bytes are
separated by a period or colon.
•
ip ip-address—Specifies an IP address.
•
ip-list—Specifies that a list of IP addresses immediately follows the option
code.
i p-address1
•
Command Mode
DHCP Pool Host Configuration mode
DHCP Pool Network Configuration mode
User Guidelines
DHCP provides a framework for passing configuration information to hosts
on a TCP/IP network. Configuration parameters and other control
information are carried in tagged data items that are stored in the DHCP
message options field. The data items themselves are also called options. The
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\DCHP_Server.fm
ip-address2
[
ip-address2
[
...]—Specifies a list of one or more IP addresses.
...]
DHCP Server Commands
671
Advertisement
Table of Contents
