Ip Address Dhcp - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IP_Addressing.fm
Console(config-if)# 131.108.1.27 255.255.255.0
ip address

ip address dhcp

Use the ip address dhcp Interface Configuration (Ethernet, VLAN, Port-
channel) mode command to acquire an IP address for an Ethernet interface
from the Dynamic Host Configuration Protocol (DHCP) server. Use the no
form of this command to release an acquired IP address.
Syntax
ip address dhcp
no ip address dhcp
Parameters
No parameters
Command Mode
Interface Configuration (Ethernet, VLAN, Port-channel) mode. It cannot be
configured for a range of interfaces (range context).
User Guidelines
The ip address dhcp command allows any interface to dynamically learn its
IP address by using the DHCP protocol.
DHCP client configuration on an interface implicitly removes the static IP
address configuration on the interface.
If the device is configured to obtain its IP address from a DHCP server, it
sends a DHCPDISCOVER message to provide information about itself to the
DHCP server on the network.
If the ip address dhcp command is used with or without the optional
keyword, the DHCP option 12 field (host name option) is included in the
DISCOVER message. By default, the host name specified in the option 12
field is the globally configured device host name.
The no ip address dhcp command releases any IP address that was acquired,
and sends a DHCPRELEASE message.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
601
IP Addressing Commands