Speed; Autobaud - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Line.fm

speed

The speed Line Configuration mode command sets the line baud rate. Use
the no form of this command to restore the default configuration.
Syntax
bps
speed
no speed
Parameters
bps—Specifies the baud rate in bits per second (bps). Possible values are
2400, 4800, 9600, 19200, 38400, 57600, and 115200.
Default Configuration
The default speed is 9600 bps.
Command Mode
Line Configuration (console) mode
User Guidelines
The configured speed is applied when Autobaud is disabled. This
configuration applies to the current session only.
Example
The following example configures the line baud rate as 9600 bits per second.
Console(config-line)# 9600
speed

autobaud

The autobaud Line Configuration mode command sets the line for
automatic baud rate detection (autobaud). Use the no form of this command
to disable automatic baud rate detection.
Syntax
autobaud
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
214
Line Commands