Starting The Cli - Dell PowerConnect PC5524 Reference Manual

5500 series
Table of Contents

Advertisement

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Line Interface — Contains commands to configure the management
connections. These include commands such as line speed, timeout
settings, etc. The
Line Configuration command
enter the
VLAN Database — Contains commands to create a VLAN as a whole.
The Global Configuration mode command vlan database is used to enter
VLAN Database Interface Configuration
the
Management Access List — Contains commands to define management
access-lists. The
access-list is used to enter the
mode.
Port Channel — Contains commands to configure port-channels, for
example, assigning ports to a VLAN or port-channel. The
Configuration
Port Channel Interface Configuration
SSH Public Key-Chain — Contains commands to manually specify other
device SSH public keys. The
key pubkey-chain ssh is used to enter the
Configuration
Interface — Contains commands that configure the interface. The
Configuration
Configuration

Starting the CLI

The switch can be managed over a direct connection to the switch console
port, or via a Telnet connection. The switch is managed by entering
command keywords and parameters at the prompt. Using the switch CLI
commands is similar to entering commands on a UNIX system.
If access is via a Telnet connection, ensure the device has an IP address
defined, corresponding management access is granted, and the workstation
used to access the device is connected to the device prior to using CLI
commands.
Accessing the CLI from the Console Line
1.
Start the device and wait until the startup procedure is complete. The User
Exec mode is entered, and the prompt "console>" is displayed.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\CLI_Preface.fm
Global Configuration
Global Configuration
Management Access List Configuration
mode command interface port-channel is used to enter the
Global Configuration
mode.
mode command interface is used to enter the
mode.
mode command line is used to
mode.
mode.
mode command management
mode.
mode command crypto
SSH Public Key-chain
Global
Global
Interface
35

Advertisement

Table of Contents
loading

Table of Contents