Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Command Mode
Global Configuration mode
User Guidelines
The priority value must be a multiple of 4096.
The switch with the lowest priority is the root of the spanning tree.
Example
The following example configures the spanning-tree priority to 12288.
Console(config)#
spanning-tree disable
Use the spanning-tree disable Interface Configuration (Ethernet, port-
channel) mode command to disable the spanning tree on a specific port. Use
the no form of this command to enable the spanning tree on a port.
Syntax
spanning-tree disable
no spanning-tree disable
Default Configuration
Spanning tree is enabled on all ports.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Example
The following example disables the spanning tree on gigabitethernet port
1/0/5
Console(config)#
Console(config-if)#
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
458
Spanning-Tree Commands
CLI\files\Spanning-Tree.fm
spanning-tree priority
gigabitethernet 1/0/5
interface
spanning-tree disable
12288
Advertisement
Table of Contents
