Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Console(config)#
Console(config-if)#
qos cos
Use the qos cos Interface Configuration (Ethernet, Port-channel) mode
command to define the default CoS value of a port. Use the no form of this
command to restore the default configuration.
Syntax
default-cos
qos cos
no qos cos
Parameters
default-cos—Specifies the default CoS value of the port. If the port is trusted
and the packet is untagged, then the default CoS value become the CoS
value. (Range: 0–7)
Default Configuration
The default CoS value of a port is 0.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
Use the default CoS value to assign a CoS value to all untagged packets
entering the port. Use the qos cos override command to assign this default
CoS value to tagged packets.
Example
The following example defines the port
Console(config)#
Console(config-if)#
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
754
Quality of Service (QoS) Commands
CLI\files\QoS.fm
gi1/0/
interface
qos trust
gi1/0/
interface
3
qos cos
15
15 default CoS value as 3 .
gi1/0/
15
Advertisement
Table of Contents
