FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Console(config-if)#
switchport general acceptable-frame-type
Use the switchport general acceptable-frame-type Interface Configuration
mode command to configure ingress filtering based on packet type
tagged/untagged. Use the no form of this command to return to default.
Syntax
switchport general acceptable-frame-type
all}
no switchport general acceptable-frame-type
Parameters
•
tagged-only—Discard untagged packets and priority tagged packets.
•
untagged-only—Discard VLAN tagged packets (not including Priority
tagged packets)
all—Do not discard packets based on whether the packet is VLAN tagged
•
or not.
Default Configuration
All frame types are accepted at ingress.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Example
The following example configures gigabitethernet port 1/0/3 to discard
untagged frames at ingress.
Console(config)#
Console(config-if)#
Console(config-if)#
tagged-only
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
508
VLAN Commands
CLI\files\VLAN_ISCLI_Only.fm
switchport general ingress-filtering disable
interface gigabitethernet
switchport mode general
switchport general acceptable-frame-type
{tagged-only | untagged-only |
1/0/3