Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
remove—Clears the association between a secondary VLAN and a primary
•
VLAN.
•
secondary-vlan-list—Specifies one or more secondary VLANs to be
associated with a primary VLAN in a private VLAN.
Default Configuration
No private VLANs are configured.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
•
The command can only be executed in the context of the primary VLAN.
•
Private VLAN cannot be removed or change its type if it is associated with
other private VLANs.
•
Primary VLAN can be associated with only single isolated VLAN.
•
A secondary VLAN can be associated with only one primary VLAN.
•
The association of secondary VLANs with a primary VLAN cannot be
removed if there are private VLAN ports that are members in the
secondary VLAN.
•
In MSTP mode, all the VLANs that are associated with a private VLAN
should be mapped to the same instance.
switchport private-vlan mapping
Use the switchport private-vlan mapping Interface Configuration mode
command to configure the VLANs of the private-vlan promiscuous port. Use
the no form of this command to reset to default.
Syntax
switchport private-vlan mapping
vlan-list
no switchport private-vlan mapping
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
514
VLAN Commands
CLI\files\VLAN_ISCLI_Only.fm
primary-vlan-id [add | remove] secondary-
Advertisement
Table of Contents
