Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Syntax
{half | full}
duplex
no duplex
Parameters
•
half—Forces half-duplex operation.
•
full—Forces full-duplex operation.
Default Configuration
The interface operates in full duplex mode.
Command Mode
Interface Configuration (Port-channel) mode
Example
The following example configures gigabitethernet port 1/0/5 to operate in
full duplex mode.
Console(config)#
Console(config-if)#
Console(config-if)#
negotiation
Use the negotiation Interface Configuration (Ethernet, Port-channel) mode
command to enable auto-negotiation operation for the speed and duplex
parameters
and master-slave mode
default mode is master mode
auto-negotiation.
Syntax
capability
negotiation [
no negotiation
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
332
Ethernet Configuration Commands
CLI\files\Ethernet.fm
gigabitethernet 1/0/5
interface
duplex full
of a given interface, where the
. Use the no form of this command to disable
capability2
capability5
[
...
preferred
]]
[preferred {master | slave}]
Advertisement
Table of Contents
