Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\ACL.fm
Example
console(config)# ipv6 access-list server
console(config-ipv6-al)# deny tcp 3001::2/64 any any 80
mac access-list
Use the mac access-list Global Configuration mode command to define a
Layer 2 access list and to place the device in MAC access list configuration
mode. Use the no form of this command to remove the access list.
Syntax
access-list-name
mac access-list extended
access-list-name
no mac access-list extended
Parameters
access-list-name—Specifies the name of the MAC access list. (Range: access-
list-name0–32 characters - use "" for empty string)
Default
No MAC access list is defined.
Command Mode
Global Configuration mode
User Guidelines
MAC ACL is defined by a unique name. IPv4 ACL, IPv6 ACL, MAC ACL or
Policy Map cannot have the same name.
Example
console(config)# mac access-list extended server1
permit ( MAC )
Use the permit command in MAC Access List Configuration mode to set
permit conditions for an MAC access list,.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 2 0 1 2 - F O R P R O O F O N LY
708
Advertisement
Table of Contents
