Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
Default Configuration
The default update interval is 30 seconds.
Command Mode
Global Configuration mode
Example
The following example sets the interval for sending LLDP updates to 60
seconds.
Console(config)#
60
lldp timer
lldp hold-multiplier
Use the lldp hold-multiplier Global Configuration mode command to set
the time interval during which the receiving device holds a Link Layer
Discovery Protocol (LLDP) packet before discarding it. Use the no form of
this command to restore the default configuration.
Syntax
number
lldp hold-multiplier
no lldp hold-multiplier
Parameters
number—Specifies the LLDP packet hold time interval as a multiple of the
LLDP timer value. (Range: 2use the no form of this command10)
Default Configuration
The default LLDP hold multiplier is 4.
Command Mode
Global Configuration mode
User Guidelines
The actual Time-To-Live (TTL) value of LLDP frames is expressed by the
following formula:
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
426
LLDP Commands
Advertisement
Table of Contents
