Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DCHP_Server.fm
client-name
Use the client-name DHCP Pool Host Configuration mode command to
define the name of a DHCP client. The client name should not include the
domain name. Use the no form of this command to remove the client name.
Syntax
name
client-name
no client-name
Parameters
name—Specifies the client name, using standard ASCII characters. The
client name should not include the domain name. For example, the name
Mars should not be specified as mars.yahoo.com. (Length: 1–32 characters)
Command Mode
DHCP Pool Host Configuration mode
Default Coniguration
No client name is defined.
Example
The following example defines the string Client1 as the client name.
Console(config-dhcp)#
client1
client-name
default-router
Use the default-router DHCP Pool Configuration mode command to
configure the default router list for a Dynamic Host Configuration Protocol
(DHCP) client. Use the no form of this command to remove the default
router list.
Syntax
ip-address
ip-address2
ip-address8
default-router
[
...
]
no default-router
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
663
DHCP Server Commands
Advertisement
Table of Contents
