Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Example
The following example defines the available name server.
Console(config)#
ip host
Use the ip host Global Configuration mode command to define the static
host name-to-address mapping in the host cache. Use the no form of this
command to remove the static host name-to-address mapping.
Syntax
name address
ip host
name
no ip host
Parameters
•
name—Specifies the host name. (Length: 1–158 characters. Maximum
label length: 63 characters)
•
address—Specifies the associated IP address. Up to 4 addresses can be
defined.
Default Configuration
No host is defined.
Command Mode
Global Configuration mode
User Guidelines
Host names are restricted to the ASCII letters A through Z (case-insensitive),
the digits 0 through 9, the underscore and the hyphen. A period (.) is used to
separate labels.
Example
The following example defines a static host name-to-address mapping in the
host cache.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\IP_Addressing.fm
ip name-server
address2 address3 address4
[
176.16.1.18
]
IP Addressing Commands
619
Advertisement
Table of Contents
