Dell PowerConnect PC5524 Reference Manual page 450

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Auto-negotiation
Advertised
Capabilities
Operational MAU type
LLDP MED
Capabilities
Device type
L L D P M ED - N e t w o rk Po l ic y
Application type
Flags
VLAN ID
Layer 2 priority
DSCP
LLDP MED - Power Over Ethernet
Power type
Power Source
Power priority
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
450
LLDP Commands
CLI\files\LLDP.fm
The port speed/duplex/flow-control capabilities
advertised by the auto-negotiation.
The port MAU type.
The sender's LLDP-MED capabilities.
The device type. Indicates whether the sender is a
Network Connectivity Device or Endpoint Device, and
if an Endpoint, to which Endpoint Class it belongs.
The primary function of the application defined for this
network policy.
Flags. The possible values are:
Unknown policy: Policy is required by the device, but
is currently unknown.
Tagged VLAN: The specified application type is using
a Tagged VLAN.
Untagged VLAN: The specified application type is
using an Untagged VLAN.
The VLAN identifier for the application.
The Layer 2 priority used for the specified application.
The DSCP value used for the specified application.
The device power type. The possible values are:
Power Sourcing Entity (PSE) or Power Device (PD).
The power source utilized by a PSE or PD device. A
PSE device advertises its power capability. The
possible values are: Primary power source and
Backup power source. A PD device advertises its
power source. The possible values are: Primary
power, Local power, Primary and Local power.
The PD device priority. A PSE device advertises the
power priority configured for the port. A PD device
advertises the power priority configured for the device.
The possible values are: Critical, High and Low.