Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Configuration_Image.fm
console# more running-config
no spanning-tree
gi1/0/
interface range
1-48
speed 1000
exit
no lldp run
line console
exec-timeout 0
exit
cd
Use the cd Privileged EXEC mode command to change the current directory.
new-directory
cd
Parameters
new-directory—The new directory. The new directory path may be specificed as
either a Full Clarified Path or a Relative Path.
Command Mode
Privileged EXEC mode
User Guidelines
When command cd changes the current file system, the current directory of
the previous file system is saved and when the command specifying only the
file system (for example, cd usb:) sets the file system as current, the current
directory is restored.
Example
console cd usb://private/conf
console pwd
usb://private/conf
console cd ..
console pwd
usb://private
console# cd flash:
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
136
Configuration/Image File Commands
Advertisement
Table of Contents
