Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
show vlan multicast-tv
Use the show vlan multicast-tv EXEC mode command to display information
on the source ports and receiver ports of multicast-TV VLAN.
Syntax
show vlan multicast-tv vlan
Parameters
vlan-id—Specifies the VLAN ID.
Command Mode
EXEC mode
Example
The following example displays information on the source and receiver ports
of multicast-TV VLAN ID 1000.
Console #
show vlan multicast-tv vlan
Source ports
-------------
gi1/0/8,
gi1/0/9
The following table describes the significant fields shown in the display:
F i e ld
Source ports
Receiver ports
show vlan protocols-groups
Use the show vlan protocols-groups EXEC mode command to display
protocols-groups information.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\VLAN_ISCLI_Only.fm
vlan-id
Receiver Ports
----------------------
gi1/0/1-18, gi1/0/1-18, gi1/0/1-18
De s c r i p t io n
Ports that can transmit and receive traffic to and from the VLAN.
Ports that can only receive traffic from the VLAN.
1000
VLAN Commands
519
Advertisement
Table of Contents
