Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Address_Table.fm
26
Address Table Commands
bridge multicast filtering
Use the bridge multicast filtering Global Configuration mode command to
enable the filtering of multicast addresses. Use the no form of this command
to disable multicast address filtering.
Syntax
bridge multicast filtering
no bridge multicast filtering
Default Configuration
Multicast address filtering is disabled. All multicast addresses are flooded to
all ports.
Command Mode
Global Configuration mode
User Guidelines
If multicast devices exist on the VLAN, do not change the unregistered
multicast addresses' states to drop on the device ports.
If multicast devices exist on the VLAN and IGMP-snooping is not enabled,
the bridge multicast forward-all command should be used to enable
forwarding all multicast packets to the multicast switches.
Example
The following example enables bridge multicast filtering.
Console(config)#
bridge multicast filtering
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
387
Address Table Commands
Advertisement
Table of Contents
