Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IP_Addressing.fm
Syntax
{ server1-ipv4-address | server1-ipv6-address} [server-
ip name-server
address2 ... server-address8]
server-address
server-address8
no ip name-server [
...
]
Parameters
server-address—IP addresses of the name server. Up to 8 servers can be
defined in one command or by using multiple commands. The IP address can
be IPv4 address or IPv6 address. When the IPv6 address is a Link Local
address (IPv6Z address), the outgoing interface name must be specified.
Refer to the User Guidelines for the interface name syntax.
Default Configuration
No name server IP addresses are defined.
Command Mode
Global Configuration mode
User Guidelines
The preference of the servers is determined by the order in which they were
entered.
Up to 8 servers can be defined using one command or using multiple
commands.
The format of an IPv6Z address is: <ipv6-link-local-address>%<interface-
name>
interface-name = vlan<integer> | ch<integer> | isatap<integer> |
<physical-port-name> | 0
integer = <decimal-number> | <integer><decimal-number>
decimal-number = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
physical-port-name= Designated port number, for example 1/0/16.
If the egress interface is not specified, the default interface is selected.
Specifying interface zone=0 is equal to not defining an egress interface.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
618
IP Addressing Commands
Advertisement
Table of Contents
