Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
The traceroute command sends out one probe at a time. Each outgoing
packet can result in one or two error messages. A "time exceeded" error
message indicates that an intermediate router has seen and discarded the
probe. A "destination unreachable" error message indicates that the
destination node has received the probe and discarded it because it could not
deliver the packet. If the timer goes off before a response comes in, the
traceroute command prints an asterisk (*).
The traceroute command terminates when the destination responds, when
the maximum TTL is exceeded, or when the user interrupts the trace with
Esc.
The traceroute command is not relevant to IPv6 link local addresses.
Example
Router> traceroute ip umaxp1.physics.lsa.umich.edu
Type Esc to abort.
Tracing the route to umaxp1.physics.lsa.umich.edu (141.211.101.64)
1 i2-gateway.stanford.edu (192.68.191.83)
2 STAN.POS.calren2.NET (171.64.1.213) 0 msec 0 msec 0 msec
3 SUNV--STAN.POS.calren2.net (198.32.249.73) 1 msec 1 msec 1 msec
4 Abilene--QSV.POS.calren2.net (198.32.249.162)
5 kscyng-snvang.abilene.ucaid.edu (198.32.8.103)
msec
6 iplsng-kscyng.abilene.ucaid.edu (198.32.8.80)
msec
7 so-0-2-0x1.aa1.mich.net (192.122.183.9)
8 atm1-0x24.michnet8.mich.net (198.108.23.82)
9 * * *
10 A-ARB3-LSA-NG.c-SEB.umnet.umich.edu (141.211.5.22) 58 msec 58 msec 58
msec
11 umaxp1.physics.lsa.umich.edu (141.211.101.64) 62 msec 63 msec 63 msec
Trace completed
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
76
System Management Commands
CLI\files\System_Management.fm
0 msec 0 msec 0 msec
1 msec 1 msec 1 msec
33 msec 35 msec 35
47 msec 45 msec 45
56 msec
53 msec 54 msec
56 msec 56 msec 57 msec
Advertisement
Table of Contents
