Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
port-channel port-channel-list—Specifies a list of port channels. Separate
•
nonconsecutive port-channels with a comma and no spaces. Use a hyphen
to designate a range of port channels.
Default Configuration
No forbidden addresses are defined.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Before defining forbidden ports, the multicast group should be registered.
You can execute the command before the VLAN is created.
Example
The following example forbids MAC address 0100.5e02.0203 on port 2/9
within VLAN 8.
Console(config)#
Console(config-if)#
Console(config-if)#
0100.5e02.0203
bridge multicast unregistered
Use the bridge multicast unregistered Interface Configuration (Ethernet,
Port-Channel) mode command to configure the forwarding state of
unregistered multicast addresses. Use the no form of this command to restore
the default configuration.
Syntax
bridge multicast unregistered
no bridge multicast unregistered
Parameters
forwarding—Forwards unregistered multicast packets.
•
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
390
Address Table Commands
CLI\files\Address_Table.fm
interface vlan
bridge multicast address
bridge multicast forbidden address
gi1/0/9
add
{forwarding | filtering}
8
0100.5e.02.0203
Advertisement
Table of Contents
