Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
K e y w o r d
boot
tftp://
usb://
xmodem:
unit://member/i
mage
unit://member/
boot
unit://member/
startup-config
null:
mirror-config
WORD<1-128>
Command Mode
Privileged EXEC mode
User Guidelines
The location of a file system dictates the format of the source or destination
URL.
The entire copying process may take several minutes and differs from
protocol to protocol and from network to network.
If the IPv6 address is a Link Local address (IPv6Z address), the outgoing
interface name must be specified. The format of an IPv6Z address is: {
link-local-address
ipv6-link-local-address—Specifies the IPv6 Link Local address.
•
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
128
Configuration/Image File Commands
CLI\files\Configuration_Image.fm
S o u r c e o r D e s t i n a t io n
Boot file.
Source or destination URL for a TFTP network server. The syntax for
this alias is tftp://host/[directory]/filename. The host can be either an IP
address or a host name.
Copy to a file on the USB device. The syntax is:
usb://directory/filename
Source for the file from a serial connection that uses the Xmodem
protocol.
Image file on one of the units. To copy from the master to all units,
specify * in the member field.
Boot file on one of the units. To copy from the master to all units,
specify * in the member field
Configuration file used during initialization (startup) on one of the units.
Null destination for copies or files. A remote file can be copied to null to
determine its size.
Mirrored configuration file
Specify URL prefixes.
interface-name
}%{
}. The subparameters are:
ipv6-
Advertisement
Table of Contents
