Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Syntax
show ip interface
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port, Port-channel or VLAN.
Command Mode
EXEC mode
Example
The following example displays the configured IP interfaces and their types.
console# show ip interface
IP Address
-------------
10.5.234.232/24
arp
Use the arp Global Configuration mode command to add a permanent entry
to the Address Resolution Protocol (ARP) cache. Use the no form of this
command to remove an entry from the ARP cache.
Syntax
ip-address mac-address [interface-id]]
arp
ip-address
no arp
Parameters
ip-address—IP address or IP alias to map to the specified MAC address.
•
mac-address—MAC address to map to the specified IP address or IP alias.
•
interface-id—interface ID. Can be Ethernet port, Port-channel or VLAN.
•
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
604
IP Addressing Commands
CLI\files\IP_Addressing.fm
[interface-id ]
I/F
Type
------
------- --------
vlan 1
Static
Directed
Precedence Status
Broadcast
---------- -------
disable
No
Valid
Advertisement
Table of Contents
