Dell PowerConnect PC5524 Reference Manual page 66

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
keywords to designate values specific to the interface when creating a macro
that requires the assignment of a unique value.
Keyword matching is case sensitive. All matching occurrences of the keyword
are replaced with the corresponding value. Any full match of a keyword, even
if it is part of a large string, is considered a match and replaced by the
corresponding value.
Some macros might contain keywords that require a parameter value. You can
use the macro apply macro-name command to display a list of any required
values in the macro. If you apply a macro without entering the keyword
values, the commands are invalid and are therefore not applied.
When you apply a macro to an interface, the macro name is automatically
added to the interface. You can display the applied commands and macro
names by using the show running-configuration interface interface-id user
EXEC mode command.
A macro applied to an interface range behaves the same way as a macro
applied to a single interface. When a macro is applied to an interface range, it
is applied sequentially to each interface within the range. If a macro
command fails on one interface, it is nonetheless applied to the remaining
interfaces.
Example
Switch(config) #
Switch(config-if) #
Applying command...
Applying command...
Switch(config) # interface gigabitethernet 1/0/2
Switch(config-if) #
Switch(config-if) #
Switch(config) #
Switch(config-if) #
Switch(config-if) #
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
66
Macro Commands
CLI\files\750_Macro.fm
interface gigabitethernet 1/0/2
macro trace dup
'duplex full'
'speed auto'
macro apply duplex $DUPLEX full $SPEED auto
exit
interface gigabitethernet 1/0/3
macro apply dup
exit